-28%

12V 10Amp 120W DC Power Supply Driver for CCTV and LED Strip light Lamp 12 Volt 10A


Compare
  • Input Voltage: AC 90 – 264V 50 / 60Hz
  • Output Voltage: 12V DC, 10A, and 120W
  • 100% Full Load Burn-in Test
  • MTBF: 50,000 hours
  • Protections: Overload / Over Voltage / Short Circuit

685.00 950.00 ( inclu.GST)

Spread the love

* Input Voltage: AC 90 – 264V 50 / 60Hz
* Output Voltage: 12V DC, 10A, and 120W
* Output voltage: Adjustment Eange: ±20%
* Protections: Overload / Over Voltage / Short Circuit
* Auto-Recovery After Protection
* Short Circuit Protection: The power supply will be auto recovered when short circuit faults remove.
* The power supply will be auto recovered when over current faults remove.
* The power supply will not be auto recovered when faults remove.
* Universal AC input / Full range
* 100% Full Load Burn-in Test
* Cooling by Free Air Convection
* It’s Good Quality and High Performance
* Great Switching Power Supply for Home Appliances
* 12V 10A Double Output Switch Switching Low-cost Power Supply
* LED power supply with a metal body for hidden installation for LED lighting with an energy consumption of maximum 120W
* Design with Built-in EMI Filter, improve signal precision.
* EMC Standards: According with GB9254, EN55022 class A, EN61347-2-13:2008 Standards
* Certifications: CE & RoHs
* Meet CEC Energy Efficiency Level IV.
* No Minimum Load.
* Compact Size Light Weight.
* High Reliability.
* High Efficiency & low energy consumption
* Category – Switch Mode Power Adaptor (SMPS)
* MTBF >50,000 hours
* Output Type – DC
* Output – 12Volts 10Amp
* Shell Material: Metal Case / Aluminum Base
* Color: Sliver
* Weight: Around 500g
* Dimension: (199 x 98 x 42) mm / (7.80 x 3.85 x 1.57) inch (L x W x H)
* IN-DOOR USE ONLY! * This Power Supply Unit; DOES NOT; come with installation instruction, wiring cable, on/off switch, or screws. Professional installation of qualified electrician is highly recommended.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “12V 10Amp 120W DC Power Supply Driver for CCTV and LED Strip light Lamp 12 Volt 10A”

There are no reviews yet.

WhatsApp chat