Inch product description 100 percent brand new and high quality using a wide voltage lm393 comparator with a mounting screw hole, easy to install using the sensitive type photosensitive resistance sensor the comparator output signal clean waveform is good, driving ability, than 15ma with adjustable potentiometer can adjust the brightness of the light detected working voltage: 3. 3V 5v output: do digital switch output (0 and, ao analog voltage output usage: this module is sensitive to the light, usually used for detecting the ambient brightness and light intensity. When there is no light or the light intensity can not reach the value, do output is high level. When light intensity over than the value, the module do output is low level. The module digital output do can be directly connected with the microcontroller, use microcontroller detect high or low level, so that can detect the environmental light intensity change. Can use this board digital output do port drive relay module directly(our store on sale these relay modules), can also use as a photoelectric switch. The analog output ao connects with ad module and it can get more precise light intensity value through the ad converter. Specifications: board color: blue board size: approx. 3. 2Cm x 1. 4Cm/1. 26 x 0. 55 Inch package include 1 x lm393 ldr sensor inch
Lm393 Optical Photosensitive Ldr Light Sensor Module for Arduino Shield DC 3.5V
- Select inch sold and fulfilLED by invento sales inch for genuine product
- The comparator output signal clean waveform is good, driving ability, than 15ma
- Using the sensitive type photosensitive resistance sensor
- Working voltage: 33V-5v
- Output: do digital switch output (0 and, ao analog voltage output
₹119.00 ( inclu.GST)
Based on 0 reviews
W1209 Digital Thermostat Temperature Control Board -50-110 12V +Sensor0 out of 5(0)
- Control range: -50 ~ 110; Input Power: DC 12V
- Resolution: -9.9-99.9 0.1 , other temperature ranges 1; Measuring inputs: NTC (10K 0.5%) Waterproof sensor 0.5M
- Measurement accuracy: 0.1; Output range: 1 way 10A relay; Control accuracy: 0.1
- Environmental requirements: -10-60 , humidity 20% -85%; Hysteresis accuracy: 0.1; Size: 48 * 40mm
- Refresh rate: 0.5S; Power consumption: Static current: = 35MA,attract current:= 65MA
TP4056 1A Li-ion lithium Battery Charging Module Charging Board Charger TP 4056 – Mini USB0 out of 5(0)
Charge module- Linear charging.
Current- 1A adjustable.
Charge precision- 1.5%.
Input voltage- 4.5V-5.5V.
Full charge voltage- 4.2V.
Led indicator- red is charging blue is full charged.
Input interface- mini USB.
Work temperature- -10 to +85.
Inversed polarity- NO.SKU: S004
6-24V 12V/24V to 5V 3A CAR USB Charger Module DC Buck step down Converter0 out of 5(0)Features:– The max output current 3A, long time use 2.1A, enough use
– New design, 3 solid state ceramic capacitors(MCC), more safe and low ripple
– Synchronous rectification, High efficiency, 6.5V to 5V 0.7A can up to 97.5%, 12V to 5V 1A can up to 94%
– Flat copper inductor, improve conversion efficiency
– With output overvoltage protection. There is 1.5A fuse, output 5V have 300W TVS tube protect your USB device
– Using the latest USB identification circuit, perfectly compatible with IPHONE, the most of Android phones, IPAD etc
– High quality USB port
– Output voltage indicator (RED)
– Small size, 26.4 (L) * 15 (W) * 7.4 (H) mm
– Input with reverse polarity protection diode, will not damage when input connect incorrect
– Ultra-low static current, 0.85 mA only. Do not need to add swith when connected to the car battery, can be connected to car cigarette lighter cable or ACC power supply cableSKU: S003
LM2596 DC-DC Buck Converter Step Down Module0 out of 5(0)
Input voltage: 4.5-35V
Output voltage: 1.5-35V(Adjustable)
Output current: Rated current is 2A,maximum 3A(Additional heatsink is required)SKU: S002
Arduino Infrared obstacle avoidance sensor for smart car robot0 out of 5(0)
Infrared Obstacle Avoidance Sensor for Arduino Smart Car RobotSKU: S005